HOW TO USE SAW BLADE
When using a saw blade with a carbide tip, it's important to be careful since it is extremely sharp.
Remember to clean and maintain the machine regularly to ensure optimal performance.
Additionally, it's important to ensure the spindle's running tolerance is less than h7 to avoid any potential issues.
When nstalling the saw blade, it's important to ensure the flanges are clean and parallel.
Also, they should be one-third the diameter of the saw blade (or one-half the diameter of thin saw blades).
When installing the saw blade, it should be positioned about 5-6 teeth higher than the board.
Before starting the operation, make sure to double-check that the saw blade is installed firmly,
and ensure that there's nobody in front of the machine.
It's always a good idea to idle the machine first to check whether it's working properly.
Regularly check the machine to ensure everything is in good working condition
Lastly, don't forget to check the radial run out of the machine, which should be within ±0.02MM,
and the swing, which should be within ±0.01mm.
After using a saw blade for a while, it's important to clean it thoroughly to remove any resin or sawdust buildup.
This buildup can affect the blade's cutting effectiveness, so it's something to keep in mind.
Also, when you're storing your saw blade, it's best to put it back into its original package instead of just heaping it together with other tools.
This can help protect the blade and keep it in good condition for future use.
If the blade isn't sharp and has a rough cross-section, it could affect the quality of your cuts and even shorten the lifespan of the blade.
it's important to maintain your blade's sharpness and smoothness to ensure that it performs optimally.
Renovating the saw blade is necessary in certain cases：
if the power of the machine is increased,
the cutting material cracking,
when the carbide tip has an abrasion of 0.02MM or more.
It is recommended to maintain the blade to ensure optimal performance and prevent potential damage to the material being cut.
It's always recommended to send the saw blade to a professional renovating company to ensure its quality after renovation.
Having experts take care of it will ensure that it's done right and meets the desired standards.
